Up
|
Top Flange I-joist hangers meeting the unique needs of I-joists while offering superior performance and ease of installation. * Use all specified fasteners. Verify that the header can take the required fasteners specified . * face flange triangle hole (optional) secures hanger against header; optional diamond hole in seat allows further attachment of hanger to I-joist. * Because these hangers are fully die-formed, they cannot be modified. However these models will normally accommodate a skew of up to 5°. * Product tests show a 10% reduction in ultimate hanger strength when the joist is sloped to 1/2:12 when used with these hangers. Local crushing of the bottom flange or excessive deflection may be limiting; check with joist manufacturer for specific limitations on bearing of this type. |