Bently nevada 1900/27 vibration monitor s/n CK705346

UpUp


Subject: Bently nevada 1900/27 vibration monitor s/n CK705346
Bently Nevada 1900/27 Vibration Monitor S/N CK705346 .
Click Here to See more details. picture 1 picture 2 picture 3
She says "see.... i need someone who's more like that."
"Yes, like Marky Mark" she responds in a huffy tone.
"Well... you'd better start looking more like those b****es!"
Unbeknownst to us, Mr. Wahlberg was listening in on our conversation. He approached us and said "sir, you're quite right... your ex- is not hot enough for me or you... here, here's a special Quest Item to help you along the way in getting your own hot LA Woman-meat!"
I look down and see this blue, sciency item in my hands, then look back at him, confused.
"(sigh).... It's where I found all my Good Vibrations"
I mean really, who didn't see that one coming?
Bently Nevada’s 200150 and 190520 Accelerometers.
Maximum acceleration 20 g peak
Maximum differential input voltage 4 volts peak to peak
Current Draw: 60 mA. typ. 120 mA max.
Frequency: 47 Hz to 440 Hz, or DC.
Inrush: 20A typ. @ Vin=100Vac 40A typ. @ Vin=200Vac +24 Vdc Power Version
Monitor Full-scale: (Below 614Hz)
English Units: 2.0 in/s zero-to-peak
Metric Units: 50.8 mm/s zero-to-peak
Note: Full scale is limited by maximum input above 614 Hz. The maximum input is 2 volts peak, or 20 g peak. 20 g at 614 Hz is equivalent to 2 inch per second (the full scale range of the monitor). For frequencies above 614 Hz, Full scale is equal to (1228/frequency).
Frequency Response: High pass corner frequency -3 dB corner @ 8 Hz less than 1% error due to high pass corner above 30 Hz. Low pass corner Greater than 4 kHz less than 1% error due to low pass corner below 4kHz
Liquid Crystal Display and Buffered output. 30 Hz – 4 kHz: ±3% of full scale, Maximum 8 Hz – 30 Hz -30% , + 3% of full scale 4-20 mA Recorder. 30 Hz – 4 kHz: ±5% of full scale, Maximum 8 Hz – 30 Hz -30% , + 5% of full scale
Output Sensitivity: 19.7 mV/mm/s (500 mV/in/s)
Full-scale Range: 50.8 mm/s (2 in/s) zero-to-peak 4-20 mA
Output Full-scale Range: 20 mA @ 50.8 mm/s (2 in/s)
Overrange: 63.5 mm/s (2.5 in/s)
Accuracy: Adjusted with trimpot Galvanic Isolation: Optical @ 1000 Vac or 707 Vdc
Type Single-pole, double-throw.
Switched Power: 180 watts, 1800 VA Maximum
Dielectric Strength (at sea level):
Electrical: 180,000 operations at 6 A, 120 Vac
Size: 50.8 mm wide x 22.8 mm high (2.0 inches wide x 0.9 inches high)
Full-scale: 50.8 mm/s (1.999 in/s)
OK: One constant ON green LED indicates OK condition of monitor, transducers, and field wiring.
Constant OFF indicates NOT OK condition. OK LED flashing at 2 Hz indicates monitor has been NOT OK, but is now OK.
Alerthas occurred and : One yellow LED indicates an Alert condition. Flashing at 2 Hz indicates an Alert condition gone away. (Only occurs when the Alert relay is configured as nonlatching.)
Danger: One of the two red LEDs indicates a Danger condition. Flashing at 2 Hz indicates a Danger condition has occurred and gone away. (Only occurs when the Danger relay is configured as nonlatching.) BYPASS: The other red LED indicates the monitor is in BYPASS mode.
Display Mode Switch: Three positions: Normal, Alert Setpoint, and Danger Setpoint.
Controls what is shown on the LCD display.
Relay Mode Switch: Two positions; controls whether monitor is in normal or BYPASS mode.
Reset Button: Push to reset latching relays and flashing LEDs.
Configuration Switch Used to set Alert and Danger Time Delay, Alert relay drive conditions, display units, and to initiate a monitor self-test.
-20°C to +70°C (-4°F to +158°F)
-30°C to +90°C (-22°F to +194°F)
Relative Humidity: To 95%, non-condensing
We may use InstaPak "Foam in place" for your item, usually if it is fragile or large... It's super cool foam stuff that we also use for padding at our huge, nude wre$tling matches, so we know it works well, ;)
If we arrange a local pick up or you are using your own carrier, you will have 5 business days to arrange and pick up the item. A storage fee (see formula below) will be charged after the alloted time and the item will not be released until it is paid. If you leave it for more than 10 business days then you agree that your item will be forfited (as well as your soul).
Some of our items may have the UPC removed.
Local pickup may be available, contact us and we will let you know, if you bring candy or baked goods that may help too.
The formula for storage is [ d(s*R) ]
R=$3.50 - the current rate of retail space per sqft in Las Vegas.
Your satisfaction is very important to us. If you receive a wrong or defective item, please write a 2,000 word dissertation on what the problem is, we will be grading on grammer and content, if you do not receive a passing grade we will reject your request... Just kidding... :-D please contact us within 7 days upon receipt of package.
Are you still reading this? Well have a banana


(Click on the thumbnail images to enlarge)

Counter