Up
|
- A Complete Evaluation Kits for Philips LPC2000 ARM7TDMI-S Core Microcontrollers - Enable to Evaluate LPC2114/19/24/29/94, 2131/32/38, 2210/12/14/90/92/94 - Plenty of software examples, all in source code The 16/32-bit LPC2000 family is based on a 1.8V ARM7TDMI-S core operating at up to 60 MHz together with a wide range of peripherals including multiple serial interfaces, 10-bit ADC and external bus options. These controllers are designed for use in a range of applications including industrial control, automotive, medical, connectivity and any other general purpose embedded application requiring high performance and low power consumption in a cost-effective package. LPCEB2000™ Evaluation Board Kit is a complete evaluation environment. It contains a development board, a JTAG debugger interface, and a suite of software tools for embedded development. Design, develop, implement and test your applications on LPC2000 from Philips using a single integrated toolkit. The LPCEB2000 Evaluation Board is comprised a CPU module board and an expansion board. The expansion board named LPCEB2000-I, include: * Dimensions: 182 x 139 mm, Temperature: -45 to +85 Celsius * 1 reset button, 4x4 keyboard * 2-channel AD sampling input * 2-channel PWM output, one is output to a buzzer, the other is to PWMDAC * 8-digit 8-segment LED display * Analog signal output to a speaker * Sockets for CPU module board expansion: one 10x2, one 20x2 The CPU module board is a LPC2000 core board, three types LPC2000 CPU module board exist now: 1) LPCEB2000-S CPU module board, solder LPC2129 as default, can be replaced with LPC2114/2119/ 2124/2194 directly. 2) LPCEB2000-A CPU module board, solder LPC2132 as default, can be replaced with LPC2131/2138 directly. 3) LPCEB2000-B CPU module board, solder LPC2292 as default, can be replaced with LPC2210/2212/ 2214/2290/2294 directly. We provide plenty of software examples for this LPCEB2000 evaluation board, all in source code: * LPC_source (initialize and start up software) * beep_test (Buzzer test application, drived by GPIO) * 8LED_test (8 segment LED display application) * ADC_test (AD0 and AD1 test, show the value(mV) on 8 segment LED) * SPI_test (Control 595 chip via SPI, light the 8 indicator lights ) * Time_test (Timer test application ) * Dog_test (Watch dog test software ) * I2C_test (I2C test software ) * EINT_test (external interupt test application ) * key_test (Key board test ) * PWM_test (PWM test software ) * PWMDAC_test (PWMDAC example software ) * RTC_test (RTC application example ) * UART_test (UART drive example ) * DA_test (DAC test software, only for installed with LPCEB2000-A CPU module board) You must have a return authorization number to return your product. Please contact support@GAOTek.com to obtain an authorization number, which shall be valid for 14 days after issued. This product is covered by a warranty of 12 months. You must have a return authorization number to service your product. Please contact support@GAOTek.com to obtain an authorization number. |