Up
|
Labsphere Halogen Lamp Power Supply 200 Watt S/N 09240111605 ( Revision A6 ) With Labsphere 125 Watt, HLS-100-125 Lamp Source As Shown Comes Along With; Lamp Source, Stand, Input Lamp Cord Set, 115V Power Supply Cord. All Tested on 1-06-07. Unit is in Excellent Running Condition; Like New. More information at www.labsphere.com Used to: operate multiple lamps by providing variable output current. Used with: Application specific systems & lamp standards • Variable output current to operate multiple lamps • Ability to modify the output spectrum from a lamp. • Stable current at any current value. • Ramp-up circuit prevents the high transient currents for increased lamp lifetime Connects to: SC-5500 radiometer/controller The LPS-200-H 200-watt Lamp Power Supplies provide a precision regulated DC constant current source for the optimum operation of halogen filament lamps. They provide highly accurate currents (±0.1% ±2.0 mA of set value) for lamp standard measurements. The LPS-200-H lamp power supplies are operated from 110-120/220-240 VAC; 50/60 Hz and will maintain their output accuracy over a range of ±10% in line voltage fluctuations. The front panel functions include four control buttons (power, start, stop, option) used for powering up the instrument and starting and stopping the current flow to the lamp. The operator uses the front panel to set the desired current or Labsphere light source. The power supply slowly ramps up to the desired setting (ramp-up time is approximately 2 minutes). This ramp-up circuit prevents the high transient currents associated with filament lamps, which shorten their lifetime. The option key includes the following features: select current value or Labsphere light source and rear panel remote or local sensing of voltage. Up and down scroll keys are used for setting the current precisely. The start and stop functions may also be controlled through the SC-5500 Integrating Sphere System Control. Two rows of backlit LCD digital readouts show the user preset current, the actual current being delivered to the lamp, and the operation time. Connections for the output current are made through the rear panel with a heavy-duty two-pin connector. Compatible Lamps and Light Sources: 4.4, 6, 10, 20, 30, 35, 75, 80, 120, 125, and 150 Watt. Email Tim at atmsupply@adelphia.net with any questions. |
