Up
|
Safecoat Safe Seal is a multi-use, waterbased, low gloss sealer for highly porous surfaces such as particle board, plywood, processed wood and porous concrete. Used primarily to reduce toxic outgassing: in particular, it is highly effective at sealing in formaldehyde outgassing from processed wood such as plywood, particle board and pressed wood. Safecoat SafeSeal is virtually odorless on application and odorless once cured COVERAGE: One gallon of Safecoat Safe Seal covers approximately 350 square feet in one coat depending on surface porosity. USE ON: Porous surfaces such as processed wood products, concrete, wood, new drywall, grout and plaster. Infused as a grout sealer, wipe excess off tile with a damp cloth or sponge while still wet. Test surfaces first in inconspicuous areas to be sure product absorbs into surfaces completely. Excellent at controlling formaldehyde emissions of open faced and faced fiberglass batt insulation- simply fog spray surfaces. Safecoat Safe Seal improves the adhesion and bonding power of adhesives and coatings applied to treated surfaces. Apply a thin coat to the slab and bottom of the tile, for example, before laying adhesive (in this application no cure period is necessary; the adhesive may be applied while the Safe Seal is still tacky). ADVANTAGES / SIGNIFICANT BENEFITS: - Highly effective at sealing in toxicity of underlying surface. - Safely used by and for the chemically sensitive. - Low odor, non-offensive to installer and occupant. - Fights indoor air pollution, seals in the outgassing from the substrate. - Low VOC content, meets or exceeds all federal and state air quality regulations, including California. |