Up
|
Universal Programmer, USB port, 3000+ devices -VP28B+ * Dimensions: 140×172×30mm, weight: 300g * 48 Pin ZIF socket with universal pin-drivers * Supports more than 3000 devices * Interfaces with any laptop, PC, PS/2 or compatibles through USB port * Accepts standard file format: JEDEC, INTEL (Extended) HEX, Motorola S record * Manages 16 and 32-bit word split (Set Programming) * Supports most compiler in JEDEC format including ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer and ISDATA * Features Test Vector capability and multi-array fuse map editor * Test TTL/CMOS logic ICs and Dynamic/Static Random Access Memory devices * Optimum programming for each individual device * Automatically Identifies the manufacturer and type of E(E)PROMs, Auto identifies TTL/CMOS logic IC * Device insertion and poor-pin-contact check * Supports 1.5V low voltage devices * External adapter not required for most devices * Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters * Auto-run mode starts programming automatically upon detection of chip insertion * Superior programming speed, programs 89C55 in less than 8 seconds * Supports Windows2000/NT/9x/ME/XP Device Support: (See the List) * PROM: N/CMOS E(E)PROM, Series E(E)PROM, and FLASH Memory * PLD: CPLD, EPLD, GAL, PEEL, PALCE and more * Microcontrollers: Atmel, Intel, Microchip, Signetics, etc. * TTL (74 series), CMOS (40/45 series) Logic IC * DRAM (4164, 41464...), SRAM (2114, 6116...) memory device * Programmer, cable, manual, software included You must have a return authorization number to return your product. Please contact support@GAOTek.com to obtain an authorization number, which shall be valid for 14 days after issued. This product is covered by a warranty of 12 months. You must have a return authorization number to service your product. Please contact support@GAOTek.com to obtain an authorization number. |