Up
|
THE PACKAGE READS, "FOR LIGHT TO MEDIUM DUTY LOADS IN DRYWALL" AND... * 1) INSERT EITHER #2 OR #3 PHILLIPS DRIVER BIT INTO THE RECESS OF THE ANCHOR HEAD. USE EITHER A MANUAL SCREWDRIVER OR ELECTRIC SCREW GUN. * 2) PUSH ANCHOR INTO THE SURFACE OF THE DRYWALL UNTIL THE CUTTING BLADES PENETRATE THE SURFACE. USING GENTLE FORWARD PRESSURE, ROTATE THE ANCHOR UNTIL THE COLLAR SETS FLUSH TO THE SURFACE OF THE WALL. * 3) PUT FIXTURE IN PLACE, INSERT SCREW, AND TIGHTEN UNTIL SECURE. #6 SCREWS ARE RECOMMENDED. I FOUND THESE AT A CLOSE OUT WHICH IS WHY I CAN PASS THE SAVINGS ON TO YOU. Thank you for shopping with jimdebbi |
